View ZXMN3F31DN8TA_4130514.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ZXMN3F31DN8 30V SO8 dual N-channel enhancement mode MOSFET
Summary
V(BR)DSS 30 RDS(on) () 0.024 @ VGS= 10V 0.039 @ VGS= 4.5V ID (A) 7.3 5.7
Description
This new generation Trench MOSFET from Zetex features low onresistance achievable with 4.5V gate drive.
Features
* * Low on-resistance 4.5V gate drive capability
D1
D2
Applications
* * * * * DC-DC Converters Power management functions Load switching Motor control Back lighting
G1 S1
G2 S2
S1 G1 S2
Tape width (mm) 12 Quantity per reel 500
D1 D1 D2 D2
Ordering information
DEVICE ZXMN3F31DN8TA Reel size (inches) 7
G2
Device marking
ZXMN 3F31D
Issue 1 - January 2008
(c) Zetex Semiconductors plc 2008
1
www.zetex.com
ZXMN3F31DN8
Absolute maximum ratings
Parameter Drain source voltage Gate source voltage Continous Drain Current @ VGS=10; TA=25C(b) @ VGS=10; TA=70C(b) @ VGS=10; TA=25C(a) Pulsed drain current(c) Continuous source current (body diode)(b) Pulsed source current (body diode)(c) Power dissipation at TA =25C(a)(d) Linear derating factor Power dissipation at TA =25C(a)(e) Linear derating factor Power dissipation at TA =25C(b)(d) Linear derating factor Operating and storage temperature range Tj, Tstg PD PD Symbol VDSS VGS ID Limit 30 20 7.3 5.9 5.7 33 3 33 1.25 10 1.8 14 2.1 17 -55 to 150 Unit V V A A A A A A W mW/C W mW/C W mW/C C
IDM IS ISM PD
Thermal resistance
Parameter Junction to ambient(a)(d) Junction to ambient(a)(e) Junction to ambient(b)(d) Junction to lead(f) Symbol R JA R JA R JA R JL Limit 100 70 60 53 Unit C/W C/W C/W C/W
NOTES: (a) For a device surface mounted on 25mm x 25mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions. (b) For a device surface mounted on FR4 PCB measured at t 10 sec. (c) Repetitive rating - 25mm x 25mm FR4 PCB, D=0.02, pulse width 300s - pulse width limited by maximum junction temperature. (d) For a dual device with one active die. (e) For a device with two active die running at equal power. (f) Thermal resistance from junction to solder-point (at end of drain lead).
Issue 1 - January 2008
(c) Zetex Semiconductors plc 2008
2
www.zetex.com
ZXMN3F31DN8
Thermal characteristics
Issue 1 - January 2008
(c) Zetex Semiconductors plc 2008
3
www.zetex.com
ZXMN3F31DN8
Electrical characteristics (at Tamb = 25C unless otherwise stated)
Parameter Static Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate-Body Leakage Gate-Source Threshold Voltage Static Drain-Source On-State Resistance (*) Forward Transconductance(*)() Dynamic () Input Capacitance Output Capacitance Reverse Transfer Capacitance Switching ()() Turn-On-Delay Time Rise Time Turn-Off Delay Time Fall Time Total Gate Charge Gate-Source Charge Gate Drain Charge Source-drain diode Diode Forward Voltage(*) VSD 0.82 1.2 V Tj=25C, IS= 1.7A, VGS=0V td(on) tr td(off) tf Qg Qgs Qgd 2.9 3.3 16 8 12.9 2.5 2.52 ns ns ns ns nC nC nC VDS= 15V, VGS= 10V ID= 7A VDD= 15V, ID= 1A RG 6.0, VGS=10V Ciss Coss Crss 608 132 71 pF pF pF VDS= 15V, VGS=0V f=1MHz V(BR)DSS IDSS IGSS VGS(th) RDS(on) gfs 16.5 1.0 30 0.5 100 3.0 0.024 0.039 V A nA V S ID= 250A, VGS=0V VDS= 30V, VGS=0V VGS=20V, VDS=0V ID= 250A, VDS=VGS VGS= 10V, ID= 7.0A VGS= 4.5V, ID= 6.0A VDS= 15V, ID= 7A Symbol Min. Typ. Max. Unit Conditions
NOTES: (*) Measured under pulsed conditions. Pulse width 300s; duty cycle 2%. () For design aid only, not subject to production testing () Switching characteristics are independent of operating junction temperature.
Issue 1 - January 2008
(c) Zetex Semiconductors plc 2008
4
www.zetex.com
ZXMN3F31DN8
Typical characteristics
Issue 1 - January 2008
(c) Zetex Semiconductors plc 2008
5
www.zetex.com
ZXMN3F31DN8
Test circuits
Issue 1 - January 2008
(c) Zetex Semiconductors plc 2008
6
www.zetex.com
ZXMN3F31DN8
Package outline - SO8
DIM A A1 D H E L
Inches Min. 0.053 0.004 0.189 0.228 0.150 0.016 Max. 0.069 0.010 0.197 0.244 0.157 0.050
Millimeters Min. 1.35 0.10 4.80 5.80 3.80 0.40 Max. 1.75 0.25 5.00 6.20 4.00 1.27
DIM e b c h -
Inches Min. 0.013 0.008 0 0.010 Max. 0.020 0.010 8 0.020 0.050 BSC
Millimeters Min. 0.33 0.19 0 0.25 Max. 0.51 0.25 8 0.50 1.27 BSC
Note: Controlling dimensions are in inches. Approximate dimensions are provided in millimeters
Issue 1 - January 2008
(c) Zetex Semiconductors plc 2008
7
www.zetex.com
ZXMN3F31DN8
Definitions Product change Zetex Semiconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or service. Customers are solely responsible for obtaining the latest relevant information before placing orders. Applications disclaimer The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for the user's application and meets with the user's requirements. No representation or warranty is given and no liability whatsoever is assumed by Zetex with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Zetex does not assume any legal responsibility or will not be held legally liable (whether in contract, tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business, contract, opportunity or consequential loss in the use of these circuit applications, under any circumstances. Life support Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Zetex Semiconductors plc. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Reproduction The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. Terms and Conditions All products are sold subjects to Zetex' terms and conditions of sale, and this disclaimer (save in the event of a conflict between the two when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement. For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Zetex sales office. Quality of product Zetex is an ISO 9001 and TS16949 certified semiconductor manufacturer. To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Semiconductors or one of our regionally authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com/salesnetwork Zetex Semiconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels. ESD (Electrostatic discharge) Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices. The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time. Devices suspected of being affected should be replaced. Green compliance Zetex Semiconductors is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce the use of hazardous substances and/or emissions. All Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance with WEEE and ELV directives. Product status key: "Preview" Future device intended for production at some point. Samples may be available "Active" Product status recommended for new designs "Last time buy (LTB)" Device will be discontinued and last time buy period and delivery is in effect "Not recommended for new designs" Device is still in production to support existing designs and production "Obsolete" Production has been discontinued Datasheet status key: "Draft version" This term denotes a very early datasheet version and contains highly provisional information, which may change in any manner without notice. "Provisional version" This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance. However, changes to the test conditions and specifications may occur, at any time and without notice. "Issue" This term denotes an issued datasheet containing finalized specifications. However, changes to specifications may occur, at any time and without notice. Zetex sales offices Europe Zetex GmbH Kustermann-park Balanstrae 59 D-81541 Munchen Germany Telefon: (49) 89 45 49 49 0 Fax: (49) 89 45 49 49 49 europe.sales@zetex.com Americas Zetex Inc 700 Veterans Memorial Highway Hauppauge, NY 11788 USA Telephone: (1) 631 360 2222 Fax: (1) 631 360 8222 usa.sales@zetex.com Asia Pacific Zetex (Asia Ltd) 3701-04 Metroplaza Tower 1 Hing Fong Road, Kwai Fong Hong Kong Telephone: (852) 26100 611 Fax: (852) 24250 494 asia.sales@zetex.com Corporate Headquarters Zetex Semiconductors plc Zetex Technology Park, Chadderton Oldham, OL9 9LL United Kingdom Telephone: (44) 161 622 4444 Fax: (44) 161 622 4446 hq@zetex.com
(c) 2008 Published by Zetex Semiconductors plc
Issue 1 - January 2008
(c) Zetex Semiconductors plc 2008
8
www.zetex.com

▲Up To Search▲

Price & Availability of ZXMN3F31DN8TA

	To Download ZXMN3F31DN8TA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .